- 501-945-7550
- 3706 E. Washington Ave. North Little Rock, AR 72114
- Menu
Shank Tip Construction
Replaceable, casted heat-treated steel. Bolt-on pins.
Shank Beam
4" x 4" x 3/8" slotted steel tubing with tabs welded on for quick adjustment for each shank.
Lift Mechanism
Manual lift with quick release pins at each shank
Moldboard
14" high with additional bent reinforcements
Side Panels
1/4″ thick x 18″ high x 25″ deep
Bucket Reinforcement
Two welded braces to rear of bucket; gusset between side panel and moldboard
Cutting Blades
MD-BB-60 – 3/8" thick x 6" x 59 1/2" high carbon, heat-treated cutting edges; reversible and replaceable
MD-BB-72 – 3/8" thick x 6" x 71 1/2" high carbon, heat-treated cutting edges; reversible and replaceable
A-Frame Material
5/16″ x 2 1/2″ bent HRS
3-point Hitch type
Hitch pin Cat. 2
Vertical Shank Positions
5
No difference listed.
Working Width
MD-BB-60 – 60″ | MD-BB-72 – 72″ | MD-BB-84 – 84″
Capacity
MD-BB-60 – 10.4 cubic feet | MD-BB-72 – 13.4 cubic feet | MD-BB-84 – 14.6 cubic feet
Weight
MD-BB-60 – 415 lbs. | MD-BB-72 – 460 lbs. | MD-BB-84 – 520 lbs.
Shanks
MD-BB-60 – 6 shanks | MD-BB-72 – 6 shanks | MD-BB-84 – 8 shanks
Shank Material
5/8″ thick x 18″ x 2 1/2″ HRS
Bucket Depth
30″
Minimum H.P. Rating
40 HP
Working Width
MD-BB-60 – 60″ | MD-BB-72 – 72″ | MD-BB-84 – 84″
Capacity
MD-BB-60 – 10.4 cubic feet | MD-BB-72 – 13.4 cubic feet | MD-BB-84 – 14.6 cubic feet
Weight
MD-BB-60 – 415 lbs. | MD-BB-72 – 460 lbs. | MD-BB-84 – 520 lbs.
Shanks
MD-BB-60 – 6 shanks | MD-BB-72 – 6 shanks | MD-BB-84 – 8 shanks
Shank Material
5/8″ thick x 18″ x 2 1/2″ HRS
Bucket Depth
30″
Minimum H.P. Rating
40 HP
Hall Manufacturing provides a limited warranty of one year on any machine or component, and five years on any mechanical gearbox or gearbox component.
This warranty covers defective materials and workmanship on the complete machine. Limitations and exclusions apply.
© Copyright 2023 Bush-Whacker. All Rights Reserved.