540 RPM or 1,000 RPM Three spindle gearboxes, 120 HP, base mounted, 1:1.47 ratio. One divider box, 160 HP, base mounted. All gearboxes have malleable housings, forged alloy steel, carburized and hardened gears and shafts, tapered and ball bearings. 6 splined 1 3/8″ input shaft, 2 3/8″ output shaft on spindle boxes.

Shielded PTOs made from the finest quality propeller shaft materials and needle bearing universal joints. Category 6 80-degree constant velocity main drive shaft, Category 4 intermediate, and wing drive shafts.

Three heavy-duty clutches with spring type adjustment and two friction discs.

1/2″ by 4″ material, alloy spring steel, airlift design. Free swinging when encountering obstructions. 8″ overlap for better cutting. Blade tip speed: 15,500 FPM.

Four solid rubber tires standard. Independent shock absorbing system for all-wheel axles. Cutting height adjustable from 2″ to 15″. Optional: 6 tires, aircraft tires, implement tires, and foam-filled tires.

Cutting width: 15″. Cutting height: adjustable from 2″ to 15″. Overall width: 190″. Overall length: 189″. Cutting height for aircraft and implement tires: 2″ to 17″.

88″

Without chains and tires: 3,700 lb.
With standard tires and single curtain chains: 4,340 lb.

The smooth, easy-to-clean top deck is made of 10 gauge steel.

Hydraulic lift cylinders control raising and lowering of a flexible wing (winch assembly for manual wing lift is optional). Wing may be raised to 88 degrees above horizontal and lowered to 22 degrees below the horizontal cutting plane. Optional: rephasing level lift systems.

Replaceable center and full-length wing skid shoes, transport locking bars for each wing, heavy-duty tongue assembly with dual leveling rods, hydraulic hose holder, park jack for easy hookup, and unhooking from the tractor. Swivel clevis to relieve stress on the tractor drawbar. Chain guards are an added option.